| Model Number |
IA1CM-12 |
IA1CM-17.5 |
IA1CM-24 |
IA1CM-36 |
– |
| Alternative Model |
IACM-12 |
IACM-17.5 |
IACM-24 |
IACM-36 |
– |
| Brand |
Bepto Insulation Systems |
Bepto Insulation Systems |
Bepto Insulation Systems |
Bepto Insulation Systems |
– |
| Product Type |
Manually Operated Overhead Switch Disconnector (Air-Break LBS) |
Manually Operated Overhead Switch Disconnector (Air-Break LBS) |
Manually Operated Overhead Switch Disconnector (Air-Break LBS) |
Manually Operated Overhead Switch Disconnector (Air-Break LBS) |
– |
| Application Focus |
End-of-Line Tree Network, Substation Cluster Isolation, Downstream Line Work |
End-of-Line Tree Network, Substation Cluster Isolation, Downstream Line Work |
End-of-Line Tree Network, Substation Cluster Isolation, Downstream Line Work |
End-of-Line Tree Network, Substation Cluster Isolation, Downstream Line Work |
– |
| Standard Compliance |
NF C 64-140 Type I (01/1990), NF A 91 121 |
NF C 64-140 Type I (01/1990), NF A 91 121 |
NF C 64-140 Type I (01/1990), NF A 91 121 |
NF C 64-140 Type I (01/1990), NF A 91 121 |
– |
| Rated Voltage |
12 |
17.5 |
24 |
36 |
kV |
| Rated Current |
200/400/630/1250 |
200/400/630/1250 |
200/400/630/1250 |
200/400/630/1250 |
A |
| Rated Active Load Breaking Current |
50 |
50 |
50 |
50 |
A |
| Rated No-Load Transformer Breaking |
2.5 |
2.5 |
2.5 |
2.5 |
A |
| Rated No-Load Line Breaking Capacity |
10 |
10 |
10 |
10 |
A |
| 1min Power Frequency Withstand (Phase/Earth) |
42 |
45 |
55 |
95 |
kV |
| Power Frequency Withstand (Open Contacts) |
48 |
55 |
69 |
105 |
kV |
| Lightning Impulse Withstand (Phase/Earth) |
75 |
95 |
125 |
170 |
kV |
| Lightning Impulse Withstand (Open Contacts) |
85 |
105 |
145 |
195 |
kV |
| Rated Short-Time Withstand Current |
12.5 |
12.5 |
12.5 |
12.5 |
kA |
| Rated Short-Circuit Duration |
1 |
1 |
1 |
1 |
s |
| Rated Peak Withstand Current |
31.5 |
31.5 |
31.5 |
31.5 |
kA |
| Mechanical Life |
2000 |
2000 |
2000 |
2000 |
cycles |
| Manual Operating Torque |
≤200 |
≤200 |
≤200 |
≤200 |
Nm |
| Contact Opening Distance |
>500 |
>600 |
>800 |
>1030 |
mm |
| Contact Pressure |
200 |
200 |
200 |
200 |
N |
| Main Loop Resistance |
≤150 |
≤150 |
≤150 |
≤150 |
μΩ |
| Frame Material |
Hot-Dip Galvanized Steel Profile (NF A 91 121) |
Hot-Dip Galvanized Steel Profile (NF A 91 121) |
Hot-Dip Galvanized Steel Profile (NF A 91 121) |
Hot-Dip Galvanized Steel Profile (NF A 91 121) |
– |
| Articulation |
Journaled on Bronze Bushing |
Journaled on Bronze Bushing |
Journaled on Bronze Bushing |
Journaled on Bronze Bushing |
– |
| Insulators |
RP5 Type Tempered Glass (9 Insulators with Identical Bases) |
RP5 Type Tempered Glass (9 Insulators with Identical Bases) |
RP5 Type Tempered Glass (9 Insulators with Identical Bases) |
RP5 Type Tempered Glass (9 Insulators with Identical Bases) |
– |
| Collars |
Aluminum Bronze Collars |
Aluminum Bronze Collars |
Aluminum Bronze Collars |
Aluminum Bronze Collars |
– |
| Blade Material |
Work-Hardened Copper Blade (C-Shaped Profile) |
Work-Hardened Copper Blade (C-Shaped Profile) |
Work-Hardened Copper Blade (C-Shaped Profile) |
Work-Hardened Copper Blade (C-Shaped Profile) |
– |
| Blade Drive |
Grease-Free Nylon Rollers |
Grease-Free Nylon Rollers |
Grease-Free Nylon Rollers |
Grease-Free Nylon Rollers |
– |
| Break Contacts |
Wide Penetration/Alignment Tolerances, Permanent Contact Zone Separate from Break Contact |
Wide Penetration/Alignment Tolerances, Permanent Contact Zone Separate from Break Contact |
Wide Penetration/Alignment Tolerances, Permanent Contact Zone Separate from Break Contact |
Wide Penetration/Alignment Tolerances, Permanent Contact Zone Separate from Break Contact |
– |
| Visible Opening |
Perfect Visibility of “Open” Position |
Perfect Visibility of “Open” Position |
Perfect Visibility of “Open” Position |
Perfect Visibility of “Open” Position |
– |
| Live Parts |
Stainless Steel |
Stainless Steel |
Stainless Steel |
Stainless Steel |
– |
| Connections |
25mm Diameter Cylindrical Aluminum Pins for Live Working (LWT) |
25mm Diameter Cylindrical Aluminum Pins for Live Working (LWT) |
25mm Diameter Cylindrical Aluminum Pins for Live Working (LWT) |
25mm Diameter Cylindrical Aluminum Pins for Live Working (LWT) |
– |
| Disconnect Devices |
Whip-Type |
Whip-Type |
Whip-Type |
Whip-Type |
– |
| Closing Device |
Tumbler-Type Spring-Loaded Snap-Closing (Acting Directly on Moving Shaft) |
Tumbler-Type Spring-Loaded Snap-Closing (Acting Directly on Moving Shaft) |
Tumbler-Type Spring-Loaded Snap-Closing (Acting Directly on Moving Shaft) |
Tumbler-Type Spring-Loaded Snap-Closing (Acting Directly on Moving Shaft) |
– |
| Shaft Stops |
Elastic Shaft Stops at End of Travel |
Elastic Shaft Stops at End of Travel |
Elastic Shaft Stops at End of Travel |
Elastic Shaft Stops at End of Travel |
– |
| Support Brackets |
Two Symmetrical Welded Galvanized Profile Elements (Support Head 100-360mm) |
Two Symmetrical Welded Galvanized Profile Elements (Support Head 100-360mm) |
Two Symmetrical Welded Galvanized Profile Elements (Support Head 100-360mm) |
Two Symmetrical Welded Galvanized Profile Elements (Support Head 100-360mm) |
– |
| Bird Protection |
Phase-Insulating Support for Bird Protection |
Phase-Insulating Support for Bird Protection |
Phase-Insulating Support for Bird Protection |
Phase-Insulating Support for Bird Protection |
– |
| Mechanical Control |
Lockable Control Lever with Insulation, Lower Tube with Insulation, Two Telescopic Tubes Adjustable ~300mm (Supports 11-14m), Three Roller Tube Guides |
Lockable Control Lever with Insulation, Lower Tube with Insulation, Two Telescopic Tubes Adjustable ~300mm (Supports 11-14m), Three Roller Tube Guides |
Lockable Control Lever with Insulation, Lower Tube with Insulation, Two Telescopic Tubes Adjustable ~300mm (Supports 11-14m), Three Roller Tube Guides |
Lockable Control Lever with Insulation, Lower Tube with Insulation, Two Telescopic Tubes Adjustable ~300mm (Supports 11-14m), Three Roller Tube Guides |
– |
| Support Height Range |
11-14m (15-18m with Extra Tube/Guide) |
11-14m (15-18m with Extra Tube/Guide) |
11-14m (15-18m with Extra Tube/Guide) |
11-14m (15-18m with Extra Tube/Guide) |
m |
| Application |
End-of-Line Tree Network, Substation Cluster Isolation, Downstream Line Work, Radial/Ring Network, Transformer Circuits, Live Working |
End-of-Line Tree Network, Substation Cluster Isolation, Downstream Line Work, Radial/Ring Network, Transformer Circuits, Live Working |
End-of-Line Tree Network, Substation Cluster Isolation, Downstream Line Work, Radial/Ring Network, Transformer Circuits, Live Working |
End-of-Line Tree Network, Substation Cluster Isolation, Downstream Line Work, Radial/Ring Network, Transformer Circuits, Live Working |
– |
